Regular price $24.00 USD Sale

Pediatric pulse oximeter

Quick Details

  • Type: Blood Testing Equipments
  • Brand Name: Yonker
  • Place of Origin: Jiangsu, China (Mainland)
  • Model Number: YK-K1
  • Color: Yellow,red
  • Product name: Children's fingertip pulse oximeter
  • Display Type: OLED display
  • SpO2 Measurement range: 70%~99%
  • PR:Measurement range: 30BPM~240BPM
  • Power: rechargeable lithium battery
  • Dimension: 44mm*28.3mm*26.5mm
  • Model: YK-K1
  • Detailed descriptions of product functions:
1. Display Type:OLED display
2. SpO2 Measurement range:70%~99%
Accuracy:±2% on the stage of 80%~99%;
                ±3% on the stage of 70%~79%;
                Below 70% no requirement
3. PR:Measurement range:30BPM~240BPM
Accuracy:±1BPM or ±1%(the larger one)
4  PI index:measurement scope:0~20 (optional)
5 Power: rechargeable lithium battery
6 Power consumption:below 30mA
7 Automatic power-off:the product shuts off by itself when no finger is in the product ≥8 seconds
8. Dimension:44mm×28.3mm×26.5mm
9. Operation Environment:Operation Temperature:5ºC~40ºC
Storage Temperature:-10ºC~40ºC
Ambient Humidity:15%~80% on operation
                            10%~80% in storage
Air Pressure: 70kPa~106kPa
10. Declaration:EMC of this product comply with IEC60601-1-2 standard.
11. Measurement Performance in Low Perfusion
12. Interference Resistance Capacity against Ambient Light:Device works normally when BIO-TEK INDEX Pulse Oximeter tester exerts interfering signal test.

Operation Instructions

1. Plug one finger into rubber hole of the Oximeter (it is best to plug the finger thoroughly) before releasing the clamp with the nail upwards.
2. Press button on the front panel;
3. Don't tremble your finger when the Oximeter is working. Your body is not recommended on moving status.
4. Press the button on the front panel, if we want change display direction;
5 .Read relevant datum from display screen.
6. Please charge batteries in time when OLED indicates the batteries are in low power.
 When plugging your finger into the Oximeter, your nail surface must be upward.
Declaration: Please use the medical alcohol to clean the rubber before each test and clean the tested finger with alcohol before and after the test. (The rubber inside of the Oximeter adopts medical rubber, which has no toxin, no harm, and brings no side effect such as allergy to the our skin ).
Hang rope installation
1, Put the rope thin end through the hole.
2, Put the rope coarser end through its already wearing thin end part and tighten.

- 1 x Fingertip Oximeter
- 1 x Retailed Box
- 1 x Lanyard
- 1 x English user manual
-1 x Built-in lithium battery